 |
 |
 |
 |
 |
 |
 |
 |
||||||
 |
||||||
WinLink™ 1000
Carrier-Class Sub-6GHz Radio Systems
Price & Performance Leadership in Wireless Broadband
Product Overview
RADWIN’s WinLink™ 1000 family of Point-to-Point wireless broadband solutions
deliver carrier-class performance at the most competitive price in the market.
WinLink™ 1000 solutions pack legacy TDM and Ethernet services over
the 2.3 - 2.7GHz and 4.9 - 6.020GHz spectrum bands, and comply with
worldwide standards and regulations including FCC and ETSI.
Product Highlights
• High data rate, up to
48 Mbps
• Long range, up to
80 km/50 miles
• TDM and Ethernet over a
single wireless link
• Available in various
sub-6GHz frequencies
• OFDM technology enables
operation in nLOS
• Available in PtP and
MPtP architectures
• Full local and remote
management capabilities
| Key Benefits • Industry proven solution;thousands of systemsinstalled at leading carriers globally • Extremely simple to install and maintain • Available in license exempt frequencies, eliminating regulatory overhead and reducing network ramp-up time • Significantly reduces CAPEX and OPEX |
WinLink™ 1000 is ideally suited to meet the connectivity needs of cellular operators, service providers, enterprises and private networks, providing high capacity connectivity of up to 48 Mbps at ranges of up to 80 km/50 miles. Available in multiple frequency bands and configurations, the costeffective solutions are extremely simple to install and maintain, and are typically up and running in less than an hour.
RADWIN’s WinLink™ 1000 solutions can also be installed in a unique Multiple-Point-to-Point architecture; multiple units are deployed in one hub site location, from where they provide a dedicated high-capacity connection to each remote site.
The Multiple-Point-to-Point concept builds on RADWIN’s unique Hub Site Synchronization (HSS) feature, which synchronizes the transmission of collocated WinLink™ 1000 radios thus removing potential interference commonly experienced with collocated TDD radios.
Typical Applications
Backhaul
• WinLink™ 1000 systems power a range of backhaul applications, including:
• Cellular backhaul • Backhaul to access points (for metro WiFi deployments)
• Backhaul from points of presence (PoPs) of wireless ISPs to backbone network
Broadband Access
WinLink™ 1000 provides a broadband access solution, offering Ethernet and E1s/T1s
services to end-users.
Remote Sites Connectivity
For enterprises and organizations with multiple sites, WinLink™ 1000 offers cost effective and transparent connectivity for LAN and PBX systems.
| Configuration | |
| Architecture | Indoor Unit: IDU-E (1/2x19”; 1U) IDU-C (19”, 1U) Outdoor Unit: ODU with integrated antenna, ODU for connection to external antenna |
| IDU to ODU Interface | Outdoor CAT-5e cable; Maximum cable length: 100m |
| Radio | |
| Frequency Bands | 2.3 - 2.7 GHz 4.9 - 6.020 GHz |
| Data Rate | Configurable up to 48 Mbps (bi-directional) |
| Channel Bandwidth | 20 MHz; 5/10/20 MHz supported |
| Duplex Technique | TDD |
| Modulation | OFDM – BPSK/QPSK/16QAM/64QAM |
| Max Tx Power | 23 dBm*; Configurable |
| Received Dynamic Range | >60 dB |
| Error Correction | FEC; k=1/2,2/3,3/4 |
| Encryption | AES 128 |
| Ethernet Interface | |
| Type | 10/100BaseT Interface with Auto-negotiation (IEEE 802.3) |
| Number of Ethernet Ports | 1, 2 |
| Framing/Coding | IEEE 802.3/U |
| Bridging | Self-learning up to 2047 MAC addresses IEEE 802.1Q |
| Traffic Handling | MAC layer bridging, self-learning |
| Data Latency | 3 msec (typical) |
| Max Frame Size | 1800 Bytes* |
| Line Impedance | 100Ω |
| VLAN ID for Management | Supported* |
| Connector | RJ-45 |
| E1/T1 Interface | |
| Framing | Unframed (transparent) |
| Number of E1/T1 Ports | 1, 2, 4 |
| Standard Compliance | ITU-T G.703, G.826 |
| Timing | Independent Tx and Rx timing |
| Line Code | E1: HDB3 @ 2.048 Mbps T1: B8ZS/AMI @ 1.544 Mbps |
| Latency | 5-20 msec (user configurable); default: 8 msec |
| Impedance | E1: 120Ω , balanced T1: 100Ω , balanced |
| Connector | RJ-45 |
| Jitter & Wander | According to ITU-T G.823, G.824 |
| Management | |
| Protocol | SNMP based; Telnet |
| Network Management | Kit for SNMPc and HPOV |
| Software Upgrade | Local and remote |
| Diagnostics | Local and remote loopback testing |
| Dimensions | |
| ODU | With 1ft integrated antenna: 30.5cm(W) x 5.8cm(D) x 30.5cm(H) Weight: 1.5kg/3.3lbs Without antenna: 13.5cm(W) x 4.0cm(D) x 24.5cm(H) Weight: 1.0kg/2.2lbs |
| IDU-E | 23.5cm(W) x 16.5cm(D) x 4.5cm(H) Weight: 0.5kg/1.1lbs |
| IDU-C | 43cm(W) x 29cm(D) x 4.5cm(H) Weight: 1.5kg/3.3lbs |
| Power and Mounting | |
| Power Feeding | 100-240 VAC, 50/60 Hz; -20 to -60 VDC* |
| Power Consumption | IDU-E with ODU, 10W max IDU-C with ODU, 14W max |
| Mounting | Pole or Wall |
| Environmental | |
| Outdoor Unit Enclosure | All weather cases; IP67 compliant |
| ODU Operating Temperatures | -350C to 600C / -310F to 1400F |
| IDU Operating Temperatures | -50C to 450C / 230F to 1130F |
| Humidity | ODU - Up to 100% non-condensing IDU - Up to 90% non-condensing |
| Antennas Gain Inegrated Antenna 1ft* Up to 22dBi External Antenna 2ft Up to 28dBi Additional antennas are available upon request | Beam Width 20º or 9º 4.5º | Polarization Linear Linear |
|---|
|
| Regulation | |
| Frequency Bands | 2.300-2.690GHz; 4.940-4.990 GHz; 5.140-6.020 GHz |
| Radio Regulations | |
| FCC 47CFR | part 15 subparts B&C and E, part 27 and part 90 |
| IC | RSS-210 |
| ETSI | EN 300 328 and EN 301 893 |
| UK | VNS 2107 |
| Australia | AS/NZS 4771 |
| India | WPC |
| Environmental Regulations | |
| Safety | EN 60950, IEC 60950, UL 60950, CAN-CSA C22.2 60950 |
| EMC | EN 300 386, EN 301 489, EN 55022, EN 61000, EN 55024, AS/NZS CISPR 22, CAN/CSA-CEI/IEC CISPR 22-02, FCC 47CFR class B part 15 sub-part B |
| Environmental | IEC 60721 class 4M5 IP67 |
Contact | Site Map | Privacy Policy
©2006 TelWorx All rights reserved.
 |
|
at TelWorx?
